Rear view of control panel cradles, CR100 AND CR200
32x32 'X-Y' control panels
The ISIS 32x32 X-Y control panels can be used as either local or remote control panels. When used as a remote control panel the optional 2RU cradle assembly, CR200, with built in 115V/230V input power supply and Ethernet interface should be ordered.
The simple to install coax based 10Base2 Ethernet network can support up to 32 panels and a total cable length of 300 feet. For longer distances and/or more panels, standard Ethernet LAN 'Hub' units can be used to expand the panel network to 256 panels.
Operation of the X-Y panels is very straightforward. First the desired destination (output) is selected. Once the output is selected the source (input) buttons will tally and they are used to select the desired input to that destination. Outputs that have been 'locked' are indicated by the output lamp flashing when a locked destination is selected.
The CP3232A and CP3232B panels, as illustrated, use a common set of switches for both audio and video (AFV) input selection.
The CP3232A and CP3232B panels may also be used as either local or remote control panels for the XL325 32x32 RGBHV routing switcher. When used as a local control panel, the 4RU blank panel on the XL325 should be replaced by the CP3232A/4 or CP3232B/4 mounted in a single 4RU panel.
Take a look at the 32x1 single bus control panels by clicking on the link below: