ISIS Group Catalog

Protection & Changeover Switches
ARTS Automatic Protection Switcher
ARTS-201A	Multi-level 2x1 analog protection switcher with video presence sensing on each input. Each of the two inputs consists of 1 channel of video, 4 channels of audio, and 5 general-purpose interface inputs. Operates in either automatic or manual mode. Includes one power supply and front panel LED status monitoring. The system is housed in a 1RU frame.	Datasheet	User Manual	Top
ARTS-PS	Redundant power supply for ARTS-201A & B.
ARTS-SPB	Spare analog signal processor board for ARTS-201.
ARTS-201B	Multi-level 2x1 analog protection switcher with video presence sensing on each input. Each of the two inputs consists of 1 channel of video, 4 channels of audio, and 5 general-purpose interface inputs. Operates in either automatic or manual mode. Additional features include power-off relay signal bypass and user-selectable return-to-A after signal restoration. Includes one power supply and front panel LED status monitoring. The system is housed in a 1RU frame.	Datasheet	User Manual
ARTS-SPB/B	Spare analog signal processor board for ARTS-201B.
ARTS-201/R	2x1 relay changeover. Provides 5 general-purpose interface inputs. Operates in manual mode only. Includes one power supply and front panel LED status monitoring. The system is housed in a 1RU frame.
DRTS Automatic Protection Switcher				Top
DRTS-201/1	Functionally similar to the ARTS-201A but with SDI/AES inputs and output. Also features audio presence detector on both inputs and provides analog video and audio monitoring outputs of both digital input signals.	Datasheet	User Manual
DRTS-PS	Redundant power supply for DRTS-201 series.
DRTS-SPB	Spare digital signal processor board for DRTS-201/1 or upgrade of ARTS-201 to SDI.
2 x 2 HD Automatic Protection Switcher				Top
HD-212A	2x2 HD/SDI protection switcher with video presence sensing on each input. Operates in either automatic or manual mode. Relay bypass in event of power failure and return-to-A after signal restoration. The system is housed in a 1RU frame with space for a maximum of two processor modules. It is field expandable. Includes: 1 processor module 2 relay bypass boards 1 power supply	Datasheet	User Manual
HD-212B	2x2 HD/SDI protection switcher with video presence sensing on each input. Operates in either automatic or manual mode. Relay bypass in event of power failure and return-to-A after signal restoration. Includes a core processor for Ethernet control & monitoring. The system is housed in a 1RU frame with space for a maximum of two processor modules. It is field expandable. Includes: 1 processor module 1 Ethernet processor 2 relay bypass boards 1 power supply
HD-212C	2x2 HD/SDI protection switcher with video presence sensing on each input. Operates in either automatic or manual mode. Relay bypass in event of power failure and return-to-A after signal restoration. The system is housed in a 1RU frame. Includes: 2 processor modules 2 relay bypass boards 1 power supply
HD-212D	2x2 HD/SDI protection switcher with video presence sensing on each input. Operates in either automatic or manual mode. Relay bypass in event of power failure and return-to-A after signal restoration. Includes a core processor for Ethernet control & monitoring. The system is housed in a 1RU frame. Includes: 2 processor modules 2 Ethernet processors 2 relay bypass boards 1 power supply
HD-212E	2x2 HD/SDI protection switcher with video presence sensing on each input. Operates in either automatic or manual mode. Relay bypass in event of power failure and return-to-A after signal restoration. The system is housed in a 1RU frame. This unit is not field expandable. Includes: 1 processor module 1 relay bypass board 1 power supply
HD-212F	2x2 HD/SDI protection switcher with video presence sensing on each input. Operates in either automatic or manual mode. Relay bypass in event of power failure and return-to-A after signal restoration. Includes a core processor for Ethernet control & monitoring. The system is housed in a 1RU frame. This unit is not field expandable. Includes: 1 processor module 1 Ethernet processor 1 relay bypass board 1 power supply
HD-212-PS	Redundant power supply for HD-212 series.
HD-212SPB	HD signal processor board for HD-212.
HD-212EP	Core processor for Ethernet control & monitoring.
MF-800 Manual Changeover Switcher
The MF-800 Series is a modular manual 2 x 1 video, audio and data switching system with local and/or remote control facilities.
MF-800	A 9-cell 2RU frame including one primary power supply. The frame houses any combination of up to seven switch modules (DAS-21, DV-800 or TW-422) plus one optional redundant power supply, or eight modules without redundant power supply. The frame includes a local control panel with A-B switches and LED indicators for each module.	Datasheet	User Manual	Top
MF-800B	Same as MF-800 above, except with blank plate in place of local control panel.
MF-800T	Same as MF-800 above, except has universal Take A and Take B functions.
PS-800	Primary power supply for MF-800 frame. Note: Primary power supply and redundant supply are not interchangeable.
PS-801	Redundant power supply for MF-800 frame. Note: Primary power supply and redundant supply are not interchangeable.
DAS-21	2x1 analog stereo audio switch module with balanced inputs and outputs. The audio connections are clamp-type barrier strips.
DV-800-1	2x1 digital or analog video switch module. The module provides relay switching of video signals. Connections are BNC.
TW-422	2x1 RS422/RS485 or AES/EBU audio switch module. The input and output connections are 9-pin D connectors.			Top
TW-422T	2x1 RS422/RS485 or AES/EBU audio switch module. The input and output connections are 9-pin D connectors. For use with MF-800T frame.
CP-801	1RU remote control panel with A-B switches and LED indicators. Connects to the MF-800 frame via a 25-pin D cable. Cable is not included.
INNOVATION Analog & SDI Broadcast Routing Switchers
The range of switchers in the INNOVATION series extends from analog and digital 16x1, 16x2, 8x8, 8x16, 16x16 and 32x32, to the HD 8x4, 8x8 and 16x16 and to the RGBHV five-layer 8x8, 16x16 and 32x32.
While listing the “standard off-the-shelf” switchers, control panels and accessories, we recognize that there is often a need for a unique matrix, control panel or control interface. The INNOVATION series of routing switchers had been designed to offer flexibility through hardware modularity, a non-proprietary 10base2 (thinnet) control system architecture, and an open-protocol RS232 interface. This approach provides the user with the ability to define signal formats, multi-level matrices, unique control panel mapping and external interfaces.
16x1 Analog and SDI Routers
XL161A	16x1 analog video in one 1RU frame with single power supply. See below for control panels and accessories.	Datasheet	User Manual	Top
XL161C	16x1 analog video and stereo audio in one 1RU frame with single power supply. See below for control panels and accessories.	Datasheet	User Manual
XL161D	16x1 SDI video in one 1RU frame with single power supply. See below for control panels and accessories.	Datasheet	User Manual
XL161F	16x1 SDI video and two-stream AES/EBU audio in one 1RU frame with single power supply. See below for control panels and accessories.	Datasheet	User Manual
XL161G	16x1 SDI video with D to A converter (2 SDI outputs and 2 analog outputs) in one 1RU frame with single power supply. See below for control panels and accessories.	Datasheet	User Manual
XL161J	16x1 SDI video and two-stream AES/EBU audio with video and audio D to A converters in one 1RU frame with single power supply. See below for control panels and accessories.	Datasheet	User Manual
XL161K	16x1 SDI video with D to A converter and analog stereo audio in one 1RU frame with single power supply. See below for control panels and accessories.	Datasheet	User Manual
XL161L	16x1 SDI video with analog stereo audio in one 1RU frame with single power supply. See below for control panels and accessories.	Datasheet	User Manual
XL161M	16x1 analog video and two-stream AES/EBU audio in one 1RU frame with single power supply. See below for control panels and accessories.	Datasheet	User Manual
Control Panels for 16x1 Routers
These control panels may be used in either local or remote operations. When used as a remote panel, the CR100 cradle assembly and the FR100 frame blank cover must be ordered separately from accessories below.
CP161A	1RU 16x1 single bus AFV control panel with bus-lock button.	Datasheet		Top
CP161B	1RU 16x1 single bus AFV control panel with Video Only, Audio Only and bus-lock buttons.	Datasheet
Accessories for 16x1 Routers
CR100	1RUx19” cradle that allows remote mounting of any 1 RU control panel.			Top
CR100/JS	Joystick override option mounted in a 1RUx19” cradle. Includes CP161A control panel. Permits control of all 16 inputs of router. Switch allows customer definition of return-to-previous input or stay-on-new-input selection.
FR100	1RU frame blank cover. Encloses 1RU frames when local control panel is not installed.
XL100PS	Additional power supply for all above 16x1 frames for redundancy.
CP232A	Software program on CD that allows operation and status reporting of routing switcher from PC-based GUI. Permits single or salvo takes. Computer connects to RS232 port of router.	Datasheet
16x2 Analog Routers
XL162A	16x2 analog video in one 1RU frame with single power supply. See below for control panels and accessories.	Datasheet	User Manual	Top
XL162C	16x2 analog video and stereo audio in one 1RU frame with single power supply. See below for control panels and accessories.	Datasheet	User Manual
Control Panels for 16x2 Routers
The X-Y control panel may be used in local or remote operation. The single bus control panels must be used in remote operations. The CR100 cradle assembly and the FR100 frame blank cover must be ordered separately from accessories below.
CP162A	1RU 16x2 AFV X-Y control panel.	Datasheet		Top
CP161A	1RU 16x1 single bus AFV control panel with bus-lock button.	Datasheet
CP161B	1RU 16x1 single bus AFV control panel with Video Only, Audio Only and bus-lock buttons.	Datasheet
Accessories for 16x2 Routers
CR100	1RUx19” cradle that allows remote mounting of any 1 RU control panel.			Top
R100	1RU frame blank cover. Encloses 1RU frames when local control panel is not installed.
XL100PS	Additional power supply for all above 16x2 frames for redundancy.
CP232A	Software program on CD that allows operation and status reporting of routing switcher from PC-based GUI. Permits single or salvo takes. Computer connects to RS232 port of router.	Datasheet
8x8 Analog and SDI Routers
XL818A	8x8 analog video in one 1RU frame with single power supply. See below for control panels and accessories.	Datasheet	User Manual	Top
XL818C	8x8 analog video and stereo audio in one 1RU frame with single power supply. See below for control panels and accessories.	Datasheet	User Manual
XL818D	8x8 SDI video in one 1RU frame with single power supply. See below for control panels and accessories.	Datasheet	User Manual
XL818F	8x8 SDI video and two-stream AES/EBU audio in one 1RU frame with single power supply. See below for control panels and accessories.	Datasheet	User Manual
XL818G	8x8 SDI video and analog stereo audio in one 1RU frame with single power supply. See below for control panels and accessories.	Datasheet	User Manual
Control Panels for 8x8 Routers
These control panels may be used in either local or remote operations. When used as a remote panel, the CR100 cradle assembly and the FR100 frame blank cover must be ordered separately from accessories below.
CP818A	1RU 8x8 AFV X-Y control panel.	Datasheet		Top
CP818B	1RU 8x8 X-Y control panel with Video Only and Audio Only buttons.	Datasheet
CP818C	1RU 8x8 X-Y control panel with separate rows of buttons for selection of video and audio crosspoints. Also includes an AFV button.	Datasheet
CP811A	1RU 8x1 single bus AFV control panel with bus-lock button.	Datasheet
CP811B	1RU 8x1 single bus AFV control panel with Video Only, Audio Only and bus-lock buttons.	Datasheet
Accessories for 8x8 Routers
CR100	1RUx19” cradle that allows remote mounting of any 1RU control panel.			Top
FR100	1RU frame blank cover. Encloses 1RU frames when local control panel is not installed.
XL100PS	Additional power supply for all above 8x8 frames for redundancy.
CP232A	Software program on CD that allows operation and status reporting of routing switcher from PC-based GUI. Permits single or salvo takes. Computer connects to RS232 port of router.	Datasheet
8x16 Analog Routers
XL816A	8x16 analog video in one 1RU frame with single power supply. See below for control panels and accessories.	Datasheet	User Manual	Top
XL816C	8x16 analog video and stereo audio in two 1RU frames with single power supplies and a frame-interconnect control cable. See below for control panels and accessories.	Datasheet	User Manual
Control Panels for 8x16 Routers
These control panels may be used in either local or remote operations. When used as a remote panel, the CR100 cradle assembly and the FR100 frame blank cover must be ordered separately from accessories below.
CP816A	1RU 8x16 AFV X-Y control panel.	Datasheet		Top
CP816B	1RU 8x16 X-Y control panel with Video Only and Audio Only buttons.	Datasheet
CP821A	1RU 8x2 X-Y control panel with bus lock. Selectable 2 consecutive destinations of 8x16 router to be controlled. Must be operated as remote panel only.	Datasheet
CP811A	1RU 8x1 single bus AFV control panel with bus-lock button.	Datasheet
CP811B	1RU 8x1 single bus AFV control panel with Video Only, Audio Only and bus-lock buttons.	Datasheet
Accessories for 8x16 Routers
CR100	1RUx19” cradle that allows remote mounting of any 1RU control panel.			Top
FR100	1RU frame blank cover. Encloses 1RU frames when local control panel is not installed.
XL100PS	Additional power supply for all above 8x16 frames for redundancy.
CP232A	Software program on CD that allows operation and status reporting of routing switcher from PC-based GUI. Permits single or salvo takes. Computer connects to RS232 port of router.	Datasheet
16x16 Analog and SDI Routers
XL1616A	16x16 analog video in one 1RU frame with single power supply. See below for control panels and accessories.	Datasheet	User Manual	Top
XL1616C	16x16 analog video and stereo audio in two 1RU frames with single power supplies, and a frame-interconnect control cable. See below for control panels and accessories.	Datasheet	User Manual
XL1616D	16x16 SDI video in one 1RU frame with single power supply. See below for control panels and accessories.	Datasheet	User Manual
XL1616F	16x16 SDI video and two-stream AES/EBU audio in two 1RU frames with single power supplies and a frame-interconnect control cable. See below for control panels and accessories.	Datasheet	User Manual
XL1616G	16x16 SDI video and analog stereo audio in two 1RU frames with single power supplies and a frame-interconnect control cable. See below for control panels and accessories.	Datasheet	User Manual
XL1616H	16x16 analog video and two-stream AES/EBU audio in two 1RU frames with single power supplies and a frame-interconnect control cable. See below for control panels and accessories.	Datasheet	User Manual
Control Panels for 16x16 Routers
These control panels may be used in either local or remote operations. In local operation, the panel mounts on the front of the video frame. When used as a remote panel, the CR100 or CR200 cradle assembly and the FR100 frame blank cover must be ordered separately from accessories below.
CP1616A	1RU 16x16 AFV X-Y control panel.	Datasheet		Top
CP1616B	1RU 16x16 X-Y control panel with Video Only and Audio Only buttons.	Datasheet
CP1616C	2RU 16x16 X-Y control panel with separate rows of buttons for selection of video and audio crosspoints. Also includes an AFV button. Can only be used as a remote control panel.	Datasheet
CP161A	1RU 16x1 single bus AFV control panel with bus-lock button.	Datasheet
CP161B	1RU 16x1 single bus AFV control panel with Video Only, Audio Only and bus-lock buttons.	Datasheet
Accessories for 16x16 Routers
CR100	1RUx19” cradle that allows remote mounting of any 1RU control panel.			Top
CR200	2RUx19” cradle that allows remote mounting of any 2RU control panel.
FR100	1RU frame blank cover. Encloses 1RU frames when local control panel is not installed.
XL100PS	Additional power supply for all above analog and SDI 16x16 frames for redundancy.
CP232A	Software program on CD that allows operation and status reporting of routing switcher from PC-based GUI. Permits single or salvo takes. Computer connects to RS232 port of router.	Datasheet
32x32 Analog Routers
XL3232A	32x32 analog video in one 2RU frame with single power supply. See below for control panels and accessories.	Datasheet	User Manual	Top
XL3232C	32x32 analog video and stereo audio in one 2RU and two 1RU frames, for a total of 4RU with single power supplies and a frame-interconnect control cable. See below for control panels and accessories.	Datasheet	User Manual
Control Panels for 32x32 Routers
These control panels may be used in either local or remote operations. In local operation, the panel mounts on the front of the video frame. When used as a remote panel, the CR100 or CR200 cradle assembly and the FR100 or FR200 frame blank cover must be ordered separately from accessories below.
CP3232A	2RU 32x32 AFV X-Y control panel.	Datasheet		Top
CP3232B	2RU 32x32 X-Y control panel with Video Only and Audio Only buttons.	Datasheet
CP321A	1RU 32x1 single bus AFV control panel with bus-lock button. Can only be used as a remote control panel.	Datasheet
CP321B	1RU 32x1 single bus AFV control panel with Video Only, Audio Only and bus-lock buttons. Can only be used as a remote control panel.	Datasheet
Accessories for 32x32 Routers
CR100	1RUx19” cradle that allows remote mounting of any 1RU control panel.			Top
CR200	2RUx19” cradle that allows remote mounting of any 2RU control panel.
FR100	1RU frame blank cover. Encloses 1RU frames when local control panel is not installed.
FR200	2RU frame blank cover. Encloses 2RU frames when local control panel is not installed.
XL100PS	Additional power supply for all above analog 32x32 frames for redundancy. NOTE: The XL3232A requires one* additional power supply for full redundancy. The XL3232C requires three XL100PS modules to provide full power redundancy.*
CP232A	Software program on CD that allows operation and status reporting of routing switcher from PC-based GUI. Permits single or salvo takes. Computer connects to RS232 port of router.	Datasheet
INNOVATION High Definition Routing Switchers
8X4 HD Routers
XL804HD/1A	8x4 HD asynchronous video in one 1RU frame with single power supply. See below for control panels and accessories.	Datasheet	User Manual	Top
XL804HD/2A	8x4 HD asynchronous video and two-stream AES/EBU audio in one 1RU frame with single power supply. See below for control panels and accessories.	Datasheet	User Manual
XL804HD/3A	8x4 HD asynchronous video and analog stereo audio in one 1RU frame with single power supply. See below for control panels and accessories.	Datasheet	User Manual
8X8 HD Routers
XL818HD/1A	8x8 HD asynchronous video in one 1RU frame with single power supply. See below for control panels and accessories.	Datasheet	User Manual
XL818HD/2A	8x8 HD asynchronous video and two-stream AES/EBU audio in one 1RU frame with single power supply. See below for control panels and accessories.	Datasheet	User Manual
XL818HD/3A	8x8 HD asynchronous video and analog stereo audio in one 1RU frame with single power supply. See below for control panels and accessories.	Datasheet	User Manual
Control Panels for 8x4 & 8x8 HD Routers
These control panels may be used in either local or remote operations. When used as a remote panel, the CR100 cradle assembly and the FR100 frame blank cover must be ordered separately from accessories below.
CP804A	1RU 8x4 X-Y control panel.	Datasheet		Top
CP804B	1RU 8x4 X-Y control panel with Video Only and Audio Only buttons.	Datasheet
CP804C	1RU 8x4 X-Y control panel with separate rows of buttons for selection of video and audio crosspoints. Also includes an AFV button.	Datasheet
CP818A	1RU 8x8 AFV X-Y control panel.	Datasheet
CP818B	1RU 8x8 X-Y control panel with Video Only and Audio Only buttons.	Datasheet
CP818C	1RU 8x8 X-Y control panel with separate rows of buttons for selection of video and audio crosspoints. Also includes an AFV button.	Datasheet
CP811A	1RU 8x1 single bus AFV control panel with bus-lock button.	Datasheet
CP811B	1RU 8x1 single bus AFV control panel with Video Only, Audio Only and bus-lock buttons.	Datasheet
Accessories for 8x4 & 8x8 HD Routers
CR100	1RUx19” cradle that allows remote mounting of any 1RU control panel.			Top
FR100	1RU frame blank cover. Encloses 1RU frames when local control panel is not installed.
XL200PS	Additional power supply for all above 8x4 & 8x8 HD frames for redundancy.
CP232A	Software program on CD that allows operation and status reporting of routing switcher from PC-based GUI. Permits single or salvo takes. Computer connects to RS232 port of router.	Datasheet
16x16 HD Routers
XL1616HD/1	16x16 HD/SDI video in one 1RU frame with single power supply. See below for control panels and accessories.	Datasheet	User Manual	Top
XL1616HD/2	16x16 HD/SDI video and two-stream AES/EBU audio in two 1RU frames with single power supplies and a frame-interconnect control cable. See below for control panels and accessories.	Datasheet	User Manual
XL1616HD/3	16x16 HD/SDI video and analog stereo audio in two 1RU frames with single power supplies and a frame-interconnect control cable. See below for control panels and accessories.	Datasheet	User Manual
Control Panels for 16x16 HD Routers
These control panels may be used in either local or remote operations. In local operation, the panel mounts on the front of the video frame. When used as a remote panel, the CR100 or CR200 cradle assembly and the FR100 frame blank cover must be ordered separately from accessories below.
CP1616A	1RU 16x16 AFV X-Y control panel.	Datasheet		Top
CP1616B	1RU 16x16 X-Y control panel with Video Only and Audio Only buttons.	Datasheet
CP1616C	2RU 16x16 X-Y control panel with separate rows of buttons for selection of video and audio crosspoints. Also includes an AFV button. Can only be used as a remote control panel.	Datasheet
CP161A	1RU 16x1 single bus AFV control panel with bus-lock button.	Datasheet
CP161B	1RU 16x1 single bus AFV control panel with Video Only, Audio Only and bus-lock buttons.	Datasheet
Accessories for 16x16 HD Routers
CR100	1RUx19” cradle that allows remote mounting of any 1RU control panel.			Top
CR200	2RUx19” cradle that allows remote mounting of any 2RU control panel.
FR100	1RU frame blank cover. Encloses 1RU frames when local control panel is not installed.
XL100PS	Additional power supply for all audio frames for redundancy. NOTE: The XL100PS is used only in the audio frames. The XL200PS must be used in the HD video frame.
XL200PS	Additional power supply for HD 16x16 video frame for redundancy. NOTE: The XL200PS is used only in the video frame. The XL100PS is used in the accompanying audio frame.
CP232A	Software program on CD that allows operation and status reporting of routing switcher from PC-based GUI. Permits single or salvo takes. Computer connects to RS232 port of router.	Datasheet
INNOVATION RGBHV Routing Switchers
Note: 8x8 and 16x16 RGBHV five-layer analog switchers support resolution standards from VGA through QSXGA. The 32x32 input analog switcher supports VGA through QXGA resolution.
8x8 RGBHV Switchers
XL858V	8x8 five-layer analog video matrix switcher. Input/output I/O uses HD15 connectors for compatibility with RGBHV (VGA through QSXGA) installations. The switcher is housed in one 1RU frame and includes a single power supply. See below for control panels and accessories.	Datasheet	User Manual
XL858AV	8x8 five-layer analog video matrix switcher and 8x8 stereo audio. Video input/output I/O uses HD15 connectors for compatibility with RGBHV (VGA through QSXGA) installations. The system is housed in two 1RU frames, and includes a single power supply in each frame and a frame-interconnect control cable. See below for control panels and accessories.	Datasheet	User Manual	Top
Control Panels for 8x8 Switchers
These control panels may be used in either local or remote operations. In local operation, the panel mounts on the front of the video frame. When used as a remote panel, the CR100 cradle assembly and the FR100 frame blank cover must be ordered separately from accessories below.
CP818A	1RU 8x8 X-Y control panel for XL858 switcher.	Datasheet		Top
CP818B	1RU 8x8 X-Y control panel for XL858 switcher, with Video Only and Audio Only buttons.	Datasheet
CP818C	1RU 8x8 X-Y control panel for XL858 switcher, with separate rows of buttons for selection of video and audio crosspoints. Also includes an AFV button.	Datasheet
CP811A	1RU 8x1 single bus AFV control panel for XL858 switcher, with bus-lock button.	Datasheet
CP811B	1RU 8x1 single bus AFV control panel for XL858 switcher, with Video Only, Audio Only and bus-lock buttons.	Datasheet
Accessories for 8x8 Switchers
CR100	1RUx19” cradle that allows remote mounting of 1RU control panel.			Top
CP232A	Software program on CD that allows operation and status reporting of routing switcher from PC-based GUI. Permits single or salvo takes. Computer connects to RS232 port of router.	Datasheet
XL8SMK	Spare module kit for 8-input RGBHV switchers. Includes one each of 03-7018 analog video crosspoint module, 03-7100 frame controller sub-module and 03-7001 power supply module.
16x16 RGBHV Switchers
XL165V	16x16 five-layer analog video matrix switcher. Input/output uses HD15 connectors for compatibility with RGBHV (VGA through QSXGA) installations. The switcher is housed in one 2RU frame and includes a single power supply. See below for control panels and accessories.	Datasheet	User Manual	Top
XL165AV	16x16 five-layer analog video matrix switcher and 16x16 stereo audio. Video input/output uses HD15 connectors for compatibility with RGBHV (VGA through QSXGA) installations. The video switcher is housed in one 2RU frame and the stereo audio in one 1RU frame, and includes a single power supply in each frame and a frame-interconnect control cable. See below for control panels and accessories.	Datasheet	User Manual
XL165BV	16x16 five-layer analog video matrix switcher. Input/output uses BNC connectors for RGBHV (VGA through QSXGA) installations. The switcher is housed in one 5RU frame and includes a single power supply and cooling fans. See below for control panels and accessories.	Datasheet	User Manual
XL165BA	16x16 five-layer analog video matrix switcher and 16x16 stereo audio. Video input/output uses BNC connectors for RGBHV (VGA through QSXGA) installations. The video switcher is housed in one 5RU frame with cooling fans and the stereo audio in one 1RU frame, for a total of 6RU, and includes a single power supply in each frame and a frame-interconnect control cable. See below for control panels and accessories.	Datasheet	User Manual
Control Panels for 16x16 Switchers
These control panels may be used in either local or remote operations. In local operation, the A/2 and the B/2 panels mount on the front of the HD-15 video frames. The A/5 and the B/5 panels mount on the front of the BNC video frames. When used as a remote panel, the A, B or C panel should be ordered with the CR100 or CR200 cradle assembly. The FR100, FR200 or FR500 frame blank cover must be added to enclose the front of the frame when no control panel is included locally. It should be ordered from accessories below.
CP1616A	1RU 16x16 X-Y control panel for 16x16 switchers.	Datasheet		Top
CP1616A/2	2RU 16x16 X-Y control panel. Designed to mount only on the front of the 2RU XL165V and XL165AV frames.	Datasheet
CP1616A/5	5RU 16x16 X-Y control panel. Designed to mount only on the front of the 5RU XL165BV and XL165BA video frames.	Datasheet
CP1616B	1RU 16x16 X-Y control panel for 16x16 switchers, with Video Only and Audio Only buttons.	Datasheet
CP1616B/2	2RU 16x16 X-Y control panel with Video Only and Audio Only buttons. Designed to mount only on the front of the 2RU XL165V and XL165BA frames.	Datasheet
CP1616B/5	5RU 16x16 X-Y control panel with Video Only and Audio Only buttons. Designed to mount only on the front of the 5RU XL165BV and XL165BA video frames.	Datasheet
CP1616C	2RU 16x16 X-Y control panel for XL165 switcher, with separate rows of buttons for selection of video and audio crosspoints. Also includes an AFV button.	Datasheet
CP161A	1RU 16x1 single bus AFV control panel for XL165 switcher, with bus-lock button.	Datasheet
CP161B	1RU 16x1 single bus AFV control panel for XL165 switcher, with Video Only, Audio Only and bus-lock buttons.	Datasheet
Accessories for 16x16 Switchers
CR100	1RUx19” cradle that allows remote mounting of 1RU control panel.			Top
CR200	2RUx19” cradle that allows remote mounting of 2RU control panel.
FR100	1RU frame blank cover. Encloses 1RU frame when no local control panel is installed.
FR200	2RU frame blank cover. Encloses 2RU video frame when no local control panel is installed.
FR500	5RU frame blank cover. Encloses 5RU video frame when no local control panel is installed.
XL100PS	Additional power supply for all above frames for redundancy. NOTE: The 16-input switcher requires one* additional power supply in the video frame for full redundancy and one supply per audio frame.*
CP232A	Software program on CD that allows operation and status reporting of routing switcher from PC-based GUI. Permits single or salvo takes. Computer connects to RS232 port of router.	Datasheet
XL16SMK	Spare module kit for 16-input RGBHV switchers. Includes one each of 03-7022 analog video crosspoint module, 03-7101 frame controller module and 03-7001 power supply module.
XL-RMK	Rear rack-mount kit for XL165V RGBHV switcher. Includes two side bars and two rail supports for mounting on rear rack rails to provide support for frame.
32x32 RGBHV Switchers
XL325V	32x32 five-layer analog video matrix switcher. Input/output I/O uses HD15 connectors for compatibility with RGBHV (VGA through QXGA) installations. The switcher is housed in a 4RU frame and includes two single power supplies and a cooling fan assembly. See below for control panels and accessories.	Datasheet	User Manual	Top
XL325AV	32x32 five-layer analog video matrix switcher and 32x32 stereo audio. Video input/output I/O uses HD15 connectors for compatibility with RGBHV (VGA through QXGA) installations. The video switcher is housed in a 4RU frame and includes two single power supplies and a cooling fan assembly. The stereo audio is housed in two 1RU frames, and includes a single power supply per frame and a frame-interconnect control cable. See below for control panels and accessories.	Datasheet	User Manual
Control Panels for 32x32 Switchers
These control panels may be used in either local or remote operations. In local operation, the A/4 and the B/4 panels mount on the front of the video frame. When used as a remote panel, the CR100 or CR200 cradle assembly and the FR100 or FR400 frame blank cover must be ordered separately from accessories below.
CP3232A	2RU 32x32 X-Y control panel for XL325 switcher.	Datasheet		Top
CP3232A/4	4RU 32x32 X-Y local control panel. Designed to mount only on the front of the 4RU XL325 frame.	Datasheet
CP3232B	2RU 32x32 X-Y control panel for XL325 switcher, with Video Only and Audio Only buttons.	Datasheet
CP3232B/4	4RU 32x32 X-Y local control panel with Video Only and Audio Only buttons. Designed to mount only on the front of the 4RU XL325 frame.	Datasheet
CP321A	1RU 32x1 single bus AFV control panel for XL325 switcher, with bus-lock button.	Datasheet
CP321B	1RU 32x1 single bus AFV control panel for XL325 switcher, with Video Only, Audio Only and bus-lock buttons.	Datasheet
Accessories for 32x32 switchers
CR100	1RUx19” cradle that allows remote mounting of 1RU control panel.			Top
CR200	2RUx19” cradle that allows remote mounting of 2RU control panel.
FR100	1RU frame blank cover. Encloses 1RU frame when no local control panel is installed.
FR400	4RU frame blank cover. Encloses 4RU frame when no local control panel is installed.
XL100PS	Additional power supply for all above frames for redundancy. NOTE: The 32-input switcher requires two* additional power supplies in the video frame for full redundancy and one supply per audio frame*
CP232A	Software program on CD that allows operation and status reporting of routing switcher from PC-based GUI. Permits single or salvo takes. Computer connects to RS232 port of router.	Datasheet
XL32SMK	Spare module kit for 32-input RGBHV switcher. Includes one each of 03-7034 analog video crosspoint module, 03-7101 frame controller module, fan assembly and 03-7001 power supply module.
XL325R	32x32 retro-fit kit w/additional fans and heat sinks
XL-RMK	Rear rack mount kit for 32-input RGBHV switcher. Includes two side bars and two rail supports for mounting on rear rack rails to provide support for frame.
Video and Audio Distribution
Analog & SDI Video Distribution				Top
VMF-100	2RU Mounting frame for video distribution amplifiers. Will accept any combination of up to 10 ISIS VDA-101, VDA-102, VDD-101 and VDD-102 video distribution amplifiers and/or Leitch 6800 Series DAs, generators, and converters. Includes one auto-ranging primary power supply.	Datasheet	User Manual
PS-101	Redundant power supply for the VMF-100 frame. Input voltage is auto-ranging from 90-260VAC, 50/60Hz operation.
VDA-101	General purpose analog distribution amplifier providing 8 outputs and front access adjustment of amplifier gain. Compatible with the ISIS VMF-100 and Leitch FR6801/6802 Series frames.	Datasheet	User Manual
VDA-102	Precision analog distribution amplifier providing 8 outputs and clamping, white clip and cable equalization for up to 300M of Belden 8281 or 200M of Belden 8263 cable. Compatible with the ISIS VMF-100 and Leitch FR6801/6802 Series frames.	Datasheet	User Manual
VDD-101	SDI 8-output video distribution amplifier that accommodates SMPTE reference standards 259M-A/B/C/D. Provides automatic equalization of up to 300M of Belden 8281. Other features include signal error indication and automatic ‘no input signal' muting. The VDD-101 is compatible with the ISIS VMF-100 and Leitch FR6801/6802 Series frames.	Datasheet	User Manual
VDD-102	Precision SDI, 8-output video distribution amplifier with reclocking. Accommodates SMPTE reference standards 259M-A/B/C/D. Also provides automatic equalization of up to 300M of Belden 8281. Other features include signal error indication, automatic ‘no input signal' muting, automatic selection of data rate with LED indication of SMPTE standard, and automatic output latching when data is absent. The VDD-102 is compatible with the ISIS VMF-100 and Leitch FR6801/6802 Series frames.	Datasheet	User Manual
Analog Audio Distribution				Top
AMF-100	2RU Mounting frame for audio distribution amplifiers. Will accept any combination of up to 12 ISIS ADA-101 and ADA-101R audio distribution amplifiers or Leitch 880 Series analog audio amplifiers and generators. Includes one auto-ranging primary power supply.	Datasheet	User Manual
PS-102	Redundant power supply for AMF-100 mounting frame. Input voltage is auto-ranging from 90-260VAC, 50/60Hz operation.
ADA-101	Audio distribution amplifier with mono or stereo operation. The functionality is changed with one internal jumper from a 1 input by 8 output mono amplifier to a 2 input by 4 output per channel stereo amplifier. Compatible with the ISIS AMF-100 and Leitch FR883/884 Series frames.	Datasheet	User Manual
ADA-101R	Same as the ADA-101 but also includes remote control of amplifier gain. Local or remote control of gain is selectable at the card edge. The DA has a range of ± 20dB. Compatible with the ISIS AMF-100 and Leitch FR883/884 Series frames.	Datasheet	User Manual
Build-to-Order Products
Routing Switchers - INNOVATION by ISIS
16x1 Analog and Digital Routers
XL161B	16x1 analog stereo audio in one 1RU frame with single power supply. See ISIS price list for control panels and accessories.			Top
XL161E	16x1 two-stream AES/EBU audio in one 1RU frame with single power supply. See ISIS price list for control panels and accessories.
XL161H	16x1 two-stream AES/EBU audio, with D/A converter in one 1RU frame with single power supply. See ISIS price list for control panels and accessories.
16x2 Analog Routers
XL162B	16x2 analog stereo audio in one 1RU frame with single power supply. See ISIS price list for control panels and accessories.
8x8 Analog and Digital Routers
XL818B	8x8 analog stereo audio in one 1RU frame with single power supply. See ISIS price list for control panels and accessories.
XL818E	8x8 two-stream AES/EBU audio in one 1RU frame with single power supply. See ISIS price list for control panels and accessories.
16x16 Analog and Digital Routers
XL1616A/3	16x16 RGB analog video in three 1RU frames with single power supplies and a frame-interconnect control cable. See ISIS price list for control panels and accessories.			Top
XL1616B	16x16 analog stereo audio in two 1RU frames with single power supplies and a frame-interconnect control cable. See ISIS price list for control panels and accessories.
XL1616B/1	16x16 analog mono audio in one 1RU frame with single power supply and a frame-interconnect control cable. For add-on to existing video router. See ISIS price list for control panels and accessories.
XL1616B/2	16x16 analog stereo audio in one 1RU frame with single power supply and a frame-interconnect control cable. For add-on to existing video router. See ISIS price list for control panels and accessories.
XL1616B/3	8x8 analog stereo audio in one 1RU frame with single power supply and a frame-interconnect control cable. For add-on to existing video router. See ISIS price list for control panels and accessories.
XL1616B/0	16x16 video frame for control of 16x16 audio. Contains stripped video crosspoint module, sub-control module and single power supply in one 1RU frame.			Top
XL1616C/1	16x16 analog video and mono audio in two 1RU frames with single power supplies and a frame-interconnect control cable. See ISIS price list for control panels and accessories.
XL1616E	16x16 two-stream AES/EBU audio in two 1RU frames with single power supplies and a frame-interconnect control cable. See ISIS price list for control panels and accessories.
XL1616E/1	16x16 one-stream AES/EBU audio in 1RU frame with single power supply and a frame-interconnect control cable. For add-on to existing video router. See ISIS price list for control panels and accessories.
XL1616E/2	16x16 two-stream AES/EBU audio in 1RU frame with single power supply and a frame-interconnect control cable. For add-on to existing video router. See ISIS price list for control panels and accessories.
32x32 Analog Routers
XL3232B	32x32 analog stereo audio in one 2RU and two 1RU frames, for a total of 4RU with single power supplies and a frame-interconnect control cable. See ISIS price list for control panels and accessories.			Top
XL3232B/1	32x32 analog single channel audio in one 1RU frame with single power supply. For add-on to existing video router. See ISIS price list for control panels and accessories.
XL3232B/0	32x32 video frame-only for control of 32x32 audio. Contains control module and single power supply in one 2RU frame. See ISIS price list for control panels and accessories.
Five-layer RGBHV Analog Switchers
Note: 8 input, 12 input, and 16 input RGBHV five-layer analog switchers support resolution standards from VGA through QSXGA. The 24 and 32 input analog switchers support VGA through QXGA resolution.
8 Input RGBHV Switchers
XL854V	8x4 five-layer analog video matrix switcher. Input/output I/O uses HD15 connectors for compatibility with RGBHV (VGA through QSXGA) installations. The switcher is housed in one 1RU frame and includes a single power supply. See below for control panels and accessories.			Top
XL854AV	8x4 five-layer analog video matrix switcher and 8x4 stereo audio. Video input/output I/O uses HD15 connectors for compatibility with RGBHV (VGA through QSXGA) installations. The system is housed in two 1RU frames, and includes a single power supply in each frame and a frame-interconnect control cable. See below for control panels and accessories.
Control Panels for 8 Input Switchers
These control panels may be used in either local or remote operations. In local operation, the panel mounts on the front of the video frame. When used as a remote panel, the CR100 cradle assembly and the FR100 frame blank cover must be ordered separately from accessories below.
CP804A	1RU 8x4 X-Y control panel for XL854 switcher.			Top
CP804B	1RU 8x4 X-Y control panel for XL854 switcher, with Video Only and Audio Only buttons.
CP804C	1RU 8x4 X-Y control panel for XL854 switcher, with separate rows of buttons for selection of video and audio crosspoints. Also includes an AFV button.
CP811A	1RU 8x1 single bus AFV control panel for XL854 or XL858 switcher, with bus-lock button.
CP811B	1RU 8x1 single bus AFV control panel for XL854 or XL858 switcher, with Video Only, Audio Only and bus-lock buttons.
Accessories for 8 Input Switchers
CR100	1RUx19” cradle that allows remote mounting of 1RU control panel.			Top
FR100	1RU frame blank cover. Encloses 1RU frame when no local control panel is installed.
XL100PS	Additional power supply for all above frames for redundancy. NOTE: The 8-input switcher requires one* additional power supply in the video frame for full redundancy and one supply per audio frame.*
CP232A	Software program on CD that allow operation and status reporting of routing switcher from PC-based GUI. Permits single or salvo takes. Computer connects to RS232 port of router.	Datasheet
XL8SMK	Spare module kit for 8-input RGBHV switchers. Includes one each of 03-7018 analog video crosspoint module, 03-7100 frame controller sub-module and 03-7001 power supply module.
12 Input RGBHV Switchers
XL1254V	12x4 five-layer analog video matrix switcher. Input/output I/O uses HD15 connectors for compatibility with RGBHV (VGA through QSXGA) installations. The switcher is housed in one 2RU frame and includes a single power supply. See below for control panels and accessories.			Top
XL1254AV	12x4 five-layer analog video matrix switcher and 12x4 stereo audio. Video input/output I/O uses HD15 connectors for compatibility with RGBHV (VGA through QSXGA) installations. The video switcher is housed in one 2RU frame and the stereo audio in one 1RU frame, and includes a single power supply in each frame and a frame-interconnect control cable. See below for control panels and accessories.
XL1258V	12x8 five-layer analog video matrix switcher. Input/output I/O uses HD15 connectors for compatibility with RGBHV (VGA through QSXGA) installations. The switcher is housed in one 2RU frame and includes a single power supply. See below for control panels and accessories.
XL1258AV	12x8 five-layer analog video matrix switcher and 12x8 stereo audio. Video input/output I/O uses HD15 connectors for compatibility with RGBHV (VGA through QSXGA) installations. The video switcher is housed in one 2RU frame and the stereo audio in one 1RU frame, and includes a single power supply in each frame and a frame-interconnect control cable. See below for control panels and accessories.
XL125V	12x12 five-layer analog video matrix switcher. Input/output I/O uses HD15 connectors for compatibility with RGBHV (VGA through QSXGA) installations. The switcher is housed in one 2RU frame and includes a single power supply. See below for control panels and accessories.
XL125AV	12x12 five-layer analog video matrix switcher and 12x12 stereo audio. Video input/output I/O uses HD15 connectors for compatibility with RGBHV (VGA through QSXGA) installations. The video switcher is housed in one 2RU frame and the stereo audio in one 1RU frame, and includes a single power supply in each frame and a frame-interconnect control cable. See below for control panels and accessories.
Control Panels for 12 Input Switchers
These control panels may be used in either local or remote operations. In local operation, the A/2 and the B/2 panels mount on the front of the video frame. When used as a remote panel, the CR100 or CR200 cradle assembly and the FR100 or FR200 frame blank cover must be ordered separately from accessories below.
CP1204A	1RU 12x4 X-Y control panel for XL1254 switcher.			Top
CP1204B	1RU 12x4 X-Y control panel for XL1254 switcher, with Video Only and Audio Only buttons.
CP1204B/2	2RU 12x4 X-Y control panel for XL1254 switcher, with Video Only and Audio Only buttons. Designed to mount only on the front of the 2RU XL1254 frame.
CP1204C	2RU 12x4 X-Y control panel for XL1254 switcher, with separate rows of buttons for selection of video and audio crosspoints. Also includes an AFV button.
CP1208A	1RU 12x8 X-Y control panel for XL1258 switcher.
CP1208B	1RU 12x8 X-Y control panel for XL1258 switcher, with Video Only and Audio Only buttons.
CP1208B/2	2RU 12x8 X-Y control panel with Video Only and Audio Only buttons. Designed to mount only on the front of the 2RU XL1258 frame.
CP1208C	2RU 12x8 X-Y control panel for XL1258 switcher, with separate rows of buttons for selection of video and audio crosspoints. Also includes an AFV button.
CP1212A	1RU 12x8 X-Y control panel for XL1258 switcher.
CP1212A/2	2RU 12x12 X-Y control panel for XL125 switcher. Designed to mount only on the front of the 2RU XL125 frame.
CP1212B	1RU 12x12 X-Y control panel for XL125 switcher, with Video Only and Audio Only buttons.
CP1212B/2	2RU 12x12 X-Y control panel with Video Only and Audio Only buttons. Designed to mount only on the front of the 2RU XL125 frame.
CP121A	1RU 12x1 single bus AFV control panel for XL1254, XL1258 or XL125 switcher, with bus-lock button.
CP121B	1RU 12x1 single bus AFV control panel for XL1254, XL1258 or XL125 switcher, with Video Only, Audio Only and bus-lock buttons.
CP121C	1RU 12x1 single bus control panel for XL1254, XL1258 or XL125 switcher, with separate rows of buttons for selection of video and audio crosspoints. Also includes an AFV and a bus-lock button.
Accessories for 12 Input Switchers
CR100	1RUx19” cradle that allows remote mounting of 1RU control panel.			Top
CR200	2RUx19” cradle that allows remote mounting of 2RU control panel.
FR100	1RU frame blank cover. Used on 1RU frame when no local control panel is installed.
FR200	2RU frame blank cover. Used on 2RU frame when no local control panel is installed.
XL100PS	Additional power supply for all above frames for redundancy. NOTE: The 12-input switcher requires one* additional power supply in the video frame for full redundancy and one supply per audio frame*
CP232A	Software program on CD that allow operation and status reporting of routing switcher from PC-based GUI. Permits single or salvo takes. Computer connects to RS232 port of router.	Datasheet
XL16SMK	Spare module kit for 12 and 16-input RGBHV switchers. Includes one each of 03-7022 analog video crosspoint module, 03-7101 frame controller module and 03-7001 power supply module.
XL-RMK	Rear rack mount kit for 12 through 32-input RGBHV switchers. Includes two side bars and two rail supports for mounting on rear rack rails to provide support for frame.
16 Input RGBHV Switchers
XL1654V	16x4 five-layer analog video matrix switcher. Input/output I/O uses HD15 connectors for compatibility with RGBHV (VGA through QSXGA) installations. The switcher is housed in one 2RU frame and includes a single power supply. See below for control panels and accessories.			Top
XL1654AV	16x4 five-layer analog video matrix switcher and 16x4 stereo audio. Video input/output I/O uses HD15 connectors for compatibility with RGBHV (VGA through QSXGA) installations. The video switcher is housed in one 2RU frame and the stereo audio in one 1RU frame, and includes a single power supply in each frame and a frame-interconnect control cable. See below for control panels and accessories.
XL1658V	16x8 five-layer analog video matrix switcher. Input/output I/O uses HD15 connectors for compatibility with RGBHV (VGA through QSXGA) installations. The switcher is housed in one 2RU frame and includes a single power supply. See below for control panels and accessories.
XL1658AV	16x8 five-layer analog video matrix switcher and 16x8 stereo audio. Video input/output I/O uses HD15 connectors for compatibility with RGBHV (VGA through QSXGA) installations. The video switcher is housed in one 2RU frame and the stereo audio in one 1RU frame, and includes a single power supply in each frame and a frame-interconnect control cable. See below for control panels and accessories.
Control Panels for 16 Input Switchers
These control panels may be used in either local or remote operations. In local operation, the A/2 and the B/2 panels mount on the front of the video frame. When used as a remote panel, the CR100 or CR200 cradle assembly and the FR100 or FR200 frame blank cover must be ordered separately from accessories below.
CP1604A	1RU 16x4 X-Y control panel for XL1654 switcher.			Top
CP1604B	1RU 16x4 X-Y control panel for XL1654 switcher, with Video Only and Audio Only buttons.
CP1604B/2	2RU 16x4 X-Y control panel with Video Only and Audio Only buttons. Designed to mount only on the front of the 2RU XL1654 frame.
CP1604C	2RU 16x4 X-Y control panel for XL1654 switcher, with separate rows of buttons for selection of video and audio crosspoints. Also includes an AFV button.
CP1608A	1RU 16x8 X-Y control panel for XL1658 switcher.
CP1608A/2	1RU 16x8 X-Y control panel for XL1658 switcher. Mounts on front of XL1654 frame.
CP1608B	1RU 16x8 X-Y control panel for XL1658 switcher, with Video Only and Audio Only buttons.
CP1608B/2	2RU 16x8 X-Y control panel with Video Only and Audio Only buttons. Designed to mount only on the front of the 2RU XL1658 frame.
CP1608C	2RU 16x8 X-Y control panel for XL1658 switcher, with separate rows of buttons for selection of video and audio crosspoints. Also includes an AFV button.
CP161A	1RU 16x1 single bus AFV control panel for XL1654, XL1658 or XL165 switcher, with bus-lock button.
CP161B	1RU 16x1 single bus AFV control panel for XL1654, XL1658 or XL165 switcher, with Video Only, Audio Only and bus-lock buttons.
Accessories for 16 Input Switchers
CR100	1RUx19” cradle that allows remote mounting of 1RU control panel.			Top
CR200	2RUx19” cradle that allows remote mounting of 2RU control panel.
FR100	1RU frame blank cover. Encloses 1RU frame when no local control panel is installed.
FR200	2RU frame blank cover. Encloses 2RU frame when no local control panel is installed.
XL100PS	Additional power supply for all above frames for redundancy. NOTE: The 16-input switcher requires one* additional power supply in the video frame for full redundancy and one supply per audio frame.*
CP232A	Software program on CD that allow operation and status reporting of routing switcher from PC-based GUI. Permits single or salvo takes. Computer connects to RS232 port of router.	Datasheet
XL16SMK	Spare module kit for 12 and 16-input RGBHV switchers. Includes one each of 03-7022 analog video crosspoint module, 03-7101 frame controller module and 03-7001 power supply module.
XL-RMK	Rear rack mount kit for 12 through 32-input RGBHV switchers. Includes two side bars and two rail supports for mounting on rear rack rails to provide support for frame.
24 Input RGBHV Switchers
XL2454V	24x4 five-layer analog video matrix switcher. Input/output I/O uses HD15 connectors for compatibility with RGBHV (VGA through QXGA) installations. The switcher is housed in a 4RU frame and includes two single power supplies and a cooling fan assembly. See below for control panels and accessories.			Top
XL2454AV	24x4 five-layer analog video matrix switcher and 24x8 stereo audio. Video input/output I/O uses HD15 connectors for compatibility with RGBHV (VGA through QXGA) installations. The video switcher is housed in a 4RU frame and includes two single power supplies and a cooling fan. The stereo audio is housed in two 1RU frames, and includes a single power supply per frame and a frame-interconnect control cable. See below for control panels and accessories.
XL2458V	24x8 five-layer analog video matrix switcher. Input/output I/O uses HD15 connectors for compatibility with RGBHV (VGA through QXGA) installations. The switcher is housed in a 4RU frame and includes two single power supplies and a cooling fan assembly. See below for control panels and accessories.
XL2458AV	24x8 five-layer analog video matrix switcher and 24x8 stereo audio. Video input/output I/O uses HD15 connectors for compatibility with RGBHV (VGA through QXGA) installations. The video switcher is housed in a 4RU frame and includes two single power supplies and a cooling fan. The stereo audio is housed in two 1RU frames, and includes a single power supply per frame and a frame-interconnect control cable. See below for control panels and accessories.
XL2416V	24x16 five-layer analog video matrix switcher. Input/output I/O uses HD15 connectors for compatibility with RGBHV (VGA through QXGA) installations. The switcher is housed in a 4RU frame and includes two single power supplies and a cooling fan assembly. See below for control panels and accessories.			Top
XL2416AV	24x16 five-layer analog video matrix switcher and 24x16 stereo audio. Video input/output I/O uses HD15 connectors for compatibility with RGBHV (VGA through QXGA) installations. The video switcher is housed in a 4RU frame and includes two single power supplies and a cooling fan assembly. The stereo audio is housed in two 1RU frames, and includes a single power supply per frame and a frame-interconnect control cable. See below for control panels and accessories.
XL2424V	24x24 five-layer analog video matrix switcher. Input/output I/O uses HD15 connectors for compatibility with RGBHV (VGA through QXGA) installations. The switcher is housed in a 4RU frame and includes two single power supplies and a cooling fan assembly. See below for control panels and accessories.
XL2424AV	24x24 five-layer analog video matrix switcher and 24x24 stereo audio. Video input/output I/O uses HD15 connectors for compatibility with RGBHV (VGA through QXGA) installations. The video switcher is housed in a 4RU frame and includes two single power supplies and a cooling fan assembly. The stereo audio is housed in two 1RU frames, and includes a single power supply per frame and a frame-interconnect control cable. See below for control panels and accessories.
Control Panels for 24 Input Switchers
These control panels may be used in either local or remote operations. In local operation, the A/4 and the B/4 panels mount on the front of the video frame. When used as a remote panel, the CR100 or CR200 cradle assembly and the FR100 or FR400 frame blank cover must be ordered separately from accessories below.
CP2408A	2RU 24x8 X-Y control panel for XL2458 switcher.			Top
CP2408A/4	4RU 24x8 X-Y local control panel. Designed to mount only on the front of the 4RU XL2458 frame.
CP2408B	2RU 24x8 X-Y control panel for XL2458 switcher, with Video Only and Audio Only buttons.
CP2408B/4	4RU 24x8 X-Y local control panel with Video Only and Audio Only buttons. Designed to mount only on the front of the 4RU XL2458 frame.
CP2416A	2RU 24x16 X-Y control panel for XL2416 switcher.
CP2416A/4	4RU 24x16 X-Y local control panel. Designed to mount only on the front of the 4RU XL2416 frame.
CP2416B	2RU 24x16 X-Y control panel for XL2416 switcher, with Video Only and Audio Only buttons.
CP2416B/4	4RU 24x16 X-Y local control panel with Video Only and Audio Only buttons. Designed to mount only on the front of the 2RU XL2416 frame.
CP241A	1RU 24x1 single bus AFV control panel for XL2454, XL2458 or XL2416 switcher, with bus-lock button.
CP241B	1RU 24x1 single bus AFV control panel for XL2454, XL2458 or XL2416 switcher, with Video Only, Audio Only and bus-lock buttons.
CP241C	2RU 24x1 single bus control panel for XL2454, XL2458 or XL2416 switcher, with separate rows of buttons for selection of video and audio crosspoints. Also includes an AFV and a bus-lock button.
Accessories for 24 Input Switchers
CR100	1RUx19” cradle that allows remote mounting of 1RU control panel.			Top
CR200	2RUx19” cradle that allows remote mounting of 2RU control panel.
FR100	1RU frame blank cover. Used on 1RU frame when no local control panel is installed.
FR400	4RU frame blank cover. Used on 4RU frame when no local control panel is installed.
XL100PS	Additional power supply for all above frames for redundancy. NOTE: The 24-input switcher requires two* additional power supplies in the video frame for full redundancy and one supply per audio frame.*
CP232A	Software program on CD that allow operation and status reporting of routing switcher from PC-based GUI. Permits single or salvo takes. Computer connects to RS232 port of router.	Datasheet
XL32SMK	Spare module kit for 24 and 32-input RGBHV switchers. Includes one each of 03-7034 analog video crosspoint module, 03-7101 frame controller module, fan assembly and 03-7001 power supply module.
XL325R	24x24 retro-fit kit w/additional fans and heat sinks added to crosspoint chips.
XL-RMK	Rear rack mount kit for 12 through 32-input RGBHV switchers. Includes two side bars and two rail supports for mounting on rear rack rails to provide support for frame.
32 Input RGBHV Switchers
XL3254V	32x4 five-layer analog video matrix switcher. Input/output I/O uses HD15 connectors for compatibility with RGBHV (VGA through QXGA) installations. The switcher is housed in a 4RU frame and includes two single power supplies and a cooling fan assembly. See below for control panels and accessories.			Top
XL3254AV	32x4 five-layer analog video matrix switcher and 32x8 stereo audio. Video input/output I/O uses HD15 connectors for compatibility with RGBHV (VGA through QXGA) installations. The video switcher is housed in a 4RU frame and includes two single power supplies and a cooling fan assembly. The stereo audio is housed in two 1RU frames, and includes a single power supply per frame and a frame-interconnect control cable. See below for control panels and accessories.
XL3258V	32x8 five-layer analog video matrix switcher. Input/output I/O uses HD15 connectors for compatibility with RGBHV (VGA through QXGA) installations. The switcher is housed in a 4RU frame and includes two single power supplies and a cooling fan assembly. See below for control panels and accessories.
XL3258AV	32x8 five-layer analog video matrix switcher and 32x8 stereo audio. Video input/output I/O uses HD15 connectors for compatibility with RGBHV (VGA through QXGA) installations. The video switcher is housed in a 4RU frame and includes two single power supplies and a cooling fan assembly. The stereo audio is housed in two 1RU frames, and includes a single power supply per frame and a frame-interconnect control cable. See below for control panels and accessories.
XL3216V	32x16 five-layer analog video matrix switcher. Input/output I/O uses HD15 connectors for compatibility with RGBHV (VGA through QXGA) installations. The switcher is housed in a 4RU frame and includes two single power supplies and a cooling fan assembly. See below for control panels and accessories.
XL3216AV	32x16 five-layer analog video matrix switcher and 32x16 stereo audio. Video input/output I/O uses HD15 connectors for compatibility with RGBHV (VGA through QXGA) installations. The video switcher is housed in a 4RU frame and includes two single power supplies and a cooling fan assembly. The stereo audio is housed in two 1RU frames, and includes a single power supply per frame and a frame-interconnect control cable. See below for control panels and accessories.
Control Panels for 32 Input Switchers
These control panels may be used in either local or remote operations. In local operation, the A/4 and the B/4 panels mount on the front of the video frame. When used as a remote panel, the CR100 or CR200 cradle assembly and the FR100 or FR400 frame blank cover must be ordered separately from accessories below.
CP3208A	2RU 32x8 X-Y control panel for XL3258 switcher.			Top
CP3208A/4	4RU 32x8 X-Y local control panel. Designed to mount only on the front of the 4RU XL3258 frame.
CP3208B	2RU 32x8 X-Y control panel for XL3258 switcher, with Video Only and Audio Only buttons.
CP3208B/4	4RU 32x8 X-Y local control panel with Video Only and Audio Only buttons. Designed to mount only on the front of the 4RU XL3258 frame.
CP3216A	2RU 32x16 X-Y control panel for XL3216 switcher.
CP3216A/4	4RU 32x16 X-Y local control panel. Designed to mount only on the front of the 4RU XL3216 frame.
CP3216B	2RU 32x16 X-Y control panel for XL3216 switcher, with Video Only and Audio Only buttons.
CP3216B/4	4RU 32x16 X-Y local control panel with Video Only and Audio Only buttons. Designed to mount only on the front of the 4RU XL3216 frame.
CP321A	1RU 32x1 single bus AFV control panel for XL3254, XL3258, XL3216 or XL325 switcher, with bus-lock button.
CP321B	1RU 32x1 single bus AFV control panel for XL3254, XL3258, XL3216 or XL325 switcher, with Video Only, Audio Only and bus-lock buttons.
Accessories for 32 input switchers
CR100	1RUx19” cradle that allows remote mounting of 1RU control panel.			Top
CR200	2RUx19” cradle that allows remote mounting of 2RU control panel.
FR100	1RU frame blank cover. Encloses 1RU frame when no local control panel is installed.
FR400	4RU frame blank cover. Encloses 4RU frame when no local control panel is installed.
XL100PS	Additional power supply for all above frames for redundancy. NOTE: The 32-input switcher requires two* additional power supplies in the video frame for full redundancy and one supply per audio frame*
CP232A	Software program on CD that allow operation and status reporting of routing switcher from PC-based GUI. Permits single or salvo takes. Computer connects to RS232 port of router.	Datasheet
XL32SMK	Spare module kit for 24 and 32-input RGBHV switchers. Includes one each of 03-7034 analog video crosspoint module, 03-7101 frame controller module, fan assembly and 03-7001 power supply module.
XL325R	32x32 retro-fit kit w/additional fans and heat sinks added to crosspoint chips.
XL-RMK	Rear rack mount kit for 12 through 32-input RGBHV switchers. Includes two side bars and two rail supports for mounting on rear rack rails to provide support for frame.

HD-212F

INNOVATION RGBHV Routing Switchers

XL1616B/0