4410 SDI to composite analog DAC
Features
- SDI to composite analog
- Multi-standard output
- 270Mb/s 525/625 operation
- 8 bit DAC
- Built-in color bar generator
- Compact and rugged design
- Locking connector for PSU
- NTSC/PAL output standard
- Test pattern control
The 4410 is a monitoring quality 270Mb/s SDI to composite analog encoder. It is housed in an extremely compact and rugged aluminum case ideally suited to both studio and portable applications. The analog output is configurable to different types of NTSC/PAL via switches on the end of the unit. These switches also control the output of a built in test pattern.
Specifications
| SDI input | Performance |
||
Standards |
SMPTE 259M 270Mb/s 525/625 SDI |
Differential gain |
<0.3% |
Connector |
75ohm BNC |
Differential phase |
<0.4º |
| Signal level | 800mV p-p ±10% | Delay | <10nS |
| Return loss | >15dB 5-270MHz | Input | 8-bit 4:2:2 |
Cable equalization |
Automatic up to 100m (Belden 8281) |
Quantization |
8-bit DAC |
| Analog output | Power | ||
Standards |
NTSC (USA or Japan), PAL (B,D,G,H,I,N or M) |
Voltage |
6-12V DC |
Connector |
75ohm BNC |
Current |
250mA |
Signal level |
1V p-p ±10% | Power connector |
Locking 2.5mm jack connector |
| DC offset | ±100mV | Other | |
| Return loss | 36dB to 5MHz | LED | Shows signal presence |
| Test pattern | 75% color bars (SDI input required) | Temperature range | 0ºC to 45ºC |
| .. | Dimensions | 3¼ x 2½ x 1¼ | |
| Weight | 6 oz | ||
Ordering Information
Preliminary data sheet. We reserve the right to change technical specifications without prior notice.
The ISIS Group, Inc.
119 E. McKnight Way, Unit A
Grass Valley, CA 95949
USA
Phone: 530-477-2984 Fax: 530-477-2986
119 E. McKnight Way, Unit A
Grass Valley, CA 95949
USA
Phone: 530-477-2984 Fax: 530-477-2986
Internet: www.isis-group.com
Email: ldole@isis-group.com
11-08