ISIS Group logo 
4411 SDI to component analog DAC

Features

  • SDI to component analog
  • Multi-standard output
  • 270Mb/s 525/625 operation
  • Compact and rugged design
  • 8 bit DAC
  • Built in color bar generator
  • Locking connector for PSU
Control switches
  • RGB/YUV output control
  • 525/625 output control
  • Test pattern control
Description

The 4411 is a monitoring quality 270Mb/s SDI to component analog converter. It is housed in an extremely compact and rugged aluminum case ideally suited to both studio and portable applications. The analog output is selectable to RGB or YUV via switches on the end of the unit. These switches also select between 525 & 625, enable the built in test pattern.
Specifications
SDI input

Performance

Standards

SMPTE 259M 270Mb/s 525/625 SDI

Differential gain

<0.3%

Connector

75ohm BNC

Differential phase

<0.4º
Signal level 800mV p-p ±10% Delay <10nS
Return loss >15dB 5-270MHz Input 8-bit 4:2:2

Cable equalization

Automatic up to 100m (Belden 8281)

Quantization

 8-bit DAC
Analog output Power

Standards

525/625 component YUV and RGB

Voltage

6-12V DC

Connector

75ohm BNC

Current

350mA

Signal level

1V p-p ±10%

Power connector

Locking 2.5mm jack connector
DC offset ±100mV Other
Return loss 36dB to 5MHz LED Shows signal presence
Test pattern 75% color bars (SDI input required) Temperature range 0ºC to 45ºC
.. Dimensions 3¼ x 2½ x 1¼
Weight 6 oz
Ordering Information
4411 SDI to component analog DAC 4010 1RU rack mounting frame with central PS for up to 5 units
4000 External power supply 4020 2RU rack mounting frame for up to 14 units with single or dual PSUs
opt3 4021 Central power supply for 4020 2RU rack mounting frame
Preliminary data sheet. We reserve the right to change technical specifications without prior notice.
The ISIS Group, Inc.
119 E. McKnight Way, Unit A
Grass Valley, CA 95949
USA
Phone: 530-477-2984 Fax: 530-477-2986



Internet: www.isis-group.com
Email: ldole@isis-group.com

 

11-08