|
|
4420 SDI to composite analog 10-bit DAC |
|
Features
- SDI to composite analog converter
- Multi-standard output
- 270Mb/s 525/625 operation
- 4x or 2x over-sampling
- 10 bit DAC
- VBI control
- Built-in test pattern
- Blackburst output
- Compact and rugged design
- Locking connector for PSU
Control switches
- NTSC/PAL output standard
- Test pattern enable
- Blackburst enable
- VBI blanking control
|
Description
The 4420 is a full featured broadcast quality 270Mb/s SDI to composite analog converter. It is housed in an extremely compact and rugged aluminum case ideally suited to both studio and portable applications. The analog output is configurable to different types of NTSC/PAL via switches on the end of the unit. These switches also control the output of built-in test pattern, VBI control and blackburst output. |
Specifications |
| SDI input |
Performance |
Standards |
SMPTE 259M 270Mb/s 525/625 SDI |
Differential gain |
<0.3% |
Connector |
75ohm BNC |
Differential phase |
<0.5º |
| Signal level |
800mV p-p ±10% |
Delay |
<10nS |
| Return loss |
>15dB 5-270MHz |
Input |
10-bit 4:2:2 |
Cable equalization |
Up to 100m automatic (Belden 8281) |
Quantization |
10-bit DAC |
| Analog output |
Power |
Standards |
NTSC (USA or Japan) PAL (B,D,G,H,I) |
Voltage |
6-12V DC |
| Connector |
75ohm BNC |
Current |
250mA |
Signal level |
1V p-p ±10% |
Power connector |
Locking 2.5mm jack connector |
DC offset |
±100mV |
Other |
| Return loss |
36dB to 5MHz |
LED |
Shows signal presence |
| Test pattern |
75% color bars (SDI input required) |
Temperature range |
0ºC to 45ºC |
| Blackburst output |
Blackburst timing reference signal |
Dimensions |
3¼ x 2½ x 1¼ |
| .. |
Weight |
6 oz |
|
Ordering Information |
| 4420 SDI to composite analog 10-bit DAC |
4010 1RU rack mounting frame with central PS for up to 5 units |
| 4000 External power supply |
4020 2RU rack mounting frame for up to 14 units with single or dual PSUs |
| opt3 |
4021 Central power supply for 4020 2RU rack mounting frame |
Preliminary data sheet. We reserve the right to change technical specifications without prior notice. |
The ISIS Group, Inc.
119 E. McKnight Way, Unit A
Grass Valley, CA 95949
USA
Phone: 530-477-2984 Fax: 530-477-2986 |
Internet: www.isis-group.com
Email: ldole@isis-group.com
|

11-08
|