|
|
4424 SDI to composite analog 10-bit DAC |
|
Features
- SDI to composite analog DAC
- Automatic 270Mb/s 525/625 detection
- 4x over-sampling
- 10-bit DAC
- Automatic input cable equalization to over 350m
- Re-clocked SDI output
- Built in color bar & blackburst generator (requires an SDI input)
- Compact and rugged design
- Locking connector for PSU
Control switches
- Test pattern selection
- Vertical interval blanking control
- PAL N or NTSC Japan selection
|
|
Description
The 4424 is a broadcast quality 270Mb/s SDI to composite analog converter.
It has a re-clocked SDI output. NTSC or PAL is automatically detected. Switches on the end of the unit control the output of the built-in test patterns, and blanking of the vertical blanking information.
It is housed in an extremely compact and rugged aluminum case ideally suited to both studio and portable applications.
|
Specifications |
| SDI input |
|
Standards |
SMPTE 259M 270Mb/s 525/625 SDI |
Cable drive |
Up to 800m (Belden 8281) |
Connector |
75Ω BNC |
Test patterns |
Color bars and blackburst (SDI input required) |
Signal level |
800mV p-p ±10% |
Frequency response |
Flat to 5.5MHz, -3dB at ≈ 6MHz |
Return loss |
>15dB up to 270MHz |
Differential gain |
<0.3% |
Cable equalization |
>350m automatic (Belden 8281) |
Differential phase |
<0.5º |
Re-clocked SDI output |
Delay |
<10ns |
Standards |
SMPTE 259M 270Mb/s 525/625 SDI |
Input |
10-bit 4:2:2 |
Connector |
75Ω BNC |
Quantization |
10-bit DAC |
Signal level |
800mV p-p ±10% |
Power |
Return loss |
>15dB up to 270MHz |
Voltage |
6-12V DC |
Analog output |
Current |
300mA |
Standards |
NTSC USA & Japan, PAL (B, D, G, H, I), PAL N, |
Power connector |
Locking 2.5mm jack connector (center +v) |
Format |
Composite |
Other |
Connectors |
75Ω BNC |
LED |
Shows power & signal presence |
Signal level |
1Vp-p ±10% |
Temperature range |
0˚C to 45˚C |
DC offset |
±100mV |
Dimensions |
3¼” x 2½” x 1¼” (excluding connectors) |
Return loss |
>36dB to 5.5MHz |
Weight |
9oz |
|
Ordering Information |
| 4424 SDI to composite analog |
4010 1RU rack mounting frame with central PS for up to 5 units |
| 4000 External power supply |
4020 2RU rack mounting frame for up to 14 units with single or dual PSUs |
| opt3 |
4021 Central power supply for 4020 2RU rack mounting frame |
Preliminary data sheet. We reserve the right to change technical specifications without prior notice. |
The ISIS Group, Inc.
119 E. McKnight Way, Unit A
Grass Valley, CA 95949
USA
Phone: 530-477-2984 Fax: 530-477-2986 |
Internet: www.isis-group.com
Email: ldole@isis-group.com
|

11-08
|